Pak Suzuki Motor Company Ltd, karachi
Paktive User

Business Details

Name: Pak Suzuki Motor Company Ltd Type: Plant / Factory / Workshop / Warehouse Address: DSU-13, Pakistan Steel Industrial Estate. Bin Qasim, Karachi Description: Suzuki Cars And Motorcycles Added on Paktive by: Raza From the Paktive Map: East Karachi Businesses (PECHS, Gulshan, Johar, Korangi, Shahrahe Faisal, Malir and nearby areas.)

User Rating: 3/5 (0 Votes)

Discuss Pak Suzuki Motor Company

Pages 12
69.Aamir says:3/5

Dear M/s. Pak Suzuki Motors Ltd I want to take some information for you, please tell me how many colors available for Suzuki Swift 1.3 DLX at Karachi Pakistan, actually i am recently purchase a Swift car but the dealer said i have only a some colors i.e. Gray, Silver. Red and Gum Metallic, you are advise to clear the position. Regards Aamir

70.Faisal says:1/5

sir i am diploma holder in mechanical 3 years i am wating for result so i am serching a job

71.Pak Suzuki Motors says:5/5

Dear Students, We are not offering any apprenticeship at the moment. Next year after August we will offer few apprenticeship in Pak Suzuki Motors. You could apply after August. Pak Suzuki Motors.

72.Tahir Mahmood Malik says:3/5

Dear suzuki motors i own a Liana RXI and i want a complete service of my car from Factory so as to feel a new car again. so kindly guide me in right direction and do let me know if it is possible.

73.Sameer Muhammad Farooq says:3/5

Dear sir i am the third year student of iqra university and engage in doing B.E(ELECTRONICS).Our university have given project related to course(powerelectronic) to visit an industory to get an idea and responsibilities of an electronics engineer. so plz response me as soon as possible.

74.Mohammad Salman says:3/5

i am doing diploma (D.A.E)in auto & diesel so i want to job of repair vehicals in pak suzuki company so plz informe me on my i.d

75.Zain Ahmed says:4/5

Assalam Walaikum, Respected Sir, I am student of third year BE (Mechanical Engineering) NEDUET.Sir I wish to do an internship in your company.Kindly tell me the right proceedure how I apply.

76.Muhammad Ibrahim says:3/5

Dear Sir, i am m.ibrahim s/o m.asghar my colfication is intermediate (pre-eng),and applied DAE auto and diesel technology know my last year so plZ GIVE ME JOB

77.Mahreen Asrar says:3/5

Assalamualikum i am a student of electronic engineering from NED university of engg. & tech.and am currently in 5th semester. i would like to pursue internship in your company. it would add up to my skills and perfection in my field. hoping for reply. sincerely

160HAMID ALI HI THIS JOB VERY BAD NO REPLY AND NO MSG 77
78.Hassaan Ahmed says:3/5

Dear sir/madam. sir i am the student of sir syed university in electronic engineering, is there any internship about me, related to my subject so plz contact me, my email is

79.S.m.luqman Zafar says:5/5

salam sir m electrical diploma holder poor m need a job

80.S.m.luqman Zafar says:3/5

salam m electrical diploma.... mpoor n m want intership plz help mefigsto own

81.M. Aamir says:5/5

Aslam u Alicum i want to fully repair my suzukiki khabir nintytwo model please infom comany procedure and astimate thanks

82.Shahjahan says:3/5

Aslam o likum .sir i m the student of D.A.E(mechanical & instrumentation)sir i want to do internship in your company for 1 month so kindly give me your feed back.

83.Sajid says:4/5

Dear Sir, i am sajis my colfication is intermediate (pre-eng),and applied DAE auto and warless networking computers eng dreamnw.com company technology know my last year so plZ GIVE ME JOB

84.Faraz Gohar says:3/5

salam. sir I have completed my dae in (ipc) in after few months please give me a chance for join internship in your company faraz gohar.

85.Daniyal Khan says:3/5

assalamualikum my name is daniyal khan i am the student D.A.E technology mechanical 2nd year and 1 year course (3g) mechnist coures with AUTOCAD please join nternship in your company please please join

86.Hammad Mallick says:3/5

salam.. sir i need a job in pak suzuki motor company.. i m doing DAE in mechanical i need a apprenticeship because i m fresh and i m student in 3rd year.. my collge is jinnah polytechnic institude.. thanks i m waiting for your reply...

87.Sayam Abbasi says:3/5

asslam aliykum sir i am machnical dae fresh sir i want to need intren ship for my better job thanks

88.Fahad Shafiq says:3/5

assalam walaikum sir i am b.a student in process fresh sir i want to need internship for my better job plz give me a job.........thanks

89.Hassan Khan says:3/5

I am a student of D.A.E in Computer information tecnalogy from (Aligarh institute of tecnalogy) i want intrenship for my best parformence....

90.Mr Ghulam Mohy Ud Din says:3/5

Dear Sir, I want to know about rate list of suzuki cars, preferably mehran and bolan. Thanks Mr Ghulam Mohy Ud Din

91.M.noman says:3/5

I am M.Noman.I am studient of DAE AUTO and Diesel in GPI(govt polytecnical institute lyari).I am Searching Internship or Apprenticeship If your company provide me internship or apprenticeship plz contact my email.thanks

92.Jawwad says:3/5

i want say about suzuki alto now mehran is efi why not alto become efi

93.Uzair Ahmed Talib says:3/5

im uzair im dae electronic and b.tack pass,electronic im expreins electronic card reparing totl expreins 7 year im job is gul ahmed textail karachi;thanks

94.Ayaz Ali Samtio says:3/5

i am ayaz samtio from khairpur mirs qulification msc continue environmental science

95.Mansoor Ahmed says:3/5

assalam o alikum sir i have completed my DAE in mechanical tecbnical field and now i am doing B-TECH .and i have a very good knowledege of AUTOMOBILE i want to get job in my field PLZ KINDLY

96.Raheel says:3/5

i want to complete repair my car body could you send me prize detail

97.M.saif Ali says:3/5

dear sir,assalam-o-alikum....i m student of 2nd year in pre-eng.i want internship for experience in automobile.plz give me one change plz plz plz.....

98.Muhammad Ibrahim says:3/5

dear sir, Most Respectfully I beg to say that i am m.ibrahim s/o m.asghar i have done dae auto and diesel technology and 1year diploma RACT course, and 2 months autocad course ,i have done intership HINO PAK MOTORS COMPANY limited , and TOYOTA INDUS MOTORS COMPANY LIMITED INTERSHIP complete so please give a job

99.Farhan says:3/5

suzuki mehran rear coil spring suspension please available

100.Asadullah says:3/5

6 Month Experience as Microsoft +92

101.Pervez Ahmed says:3/5

Dear sir As salam-o-alikum i am student of d.a.e 3rd year mechanical.i am searching for this company i want to joining your company internship or apprenticeships please contact me my e-mail address. I am waiting for your feedback thanks.

102.Adnan says:3/5

i m denter

103.Mohammad Salman says:4/5

(Assalam U Alaikum) Respected Sir, I am Mohammad Salman.i am doing (D.A.E) diploma in (Auto & Diesel) i am student of 3rd year in SHAHEEN TECHNICAL INSTITUTE (S.I.T.E) It is stated I am willing to do internship in your organization (Auto Mobile) I am very keen to do Job/internship in the field of my feild (Auto & Diesel) on my dabster give me one chance you will not disappoint to me plz contect me on my e.mail address.

104.Mubeen Abro says:3/5

assalamu alaikum sir i,m diploma holder in clear .plz give me job for companyand i evening time study in B-Tech .

105.Mubeen Abro says:3/5

give me job in your company

106.Syed Nabil Hassan says:3/5

Assalam-o-alikum sir i am student of institute of YMCA polytechnic and heaving diploma of DAE (Auto & Diesel) in final / 3rd year. I am seeking an opportunity to your company in apprenticeship or intership. I have passed Auto Mechanic short course and Motorcycle Mechanic course from YMCA quite successfully during my study in YMCA. Thankyou plz reply.

107.Tahir Siddque says:3/5

Asslam-u-alikum.i am a fresh auto&diesel diploma holdar.i want a job in suzuki company.

108.Israr Ahmad says:3/5

sir i am student of mechanical engg and i want intership at your industry in november and december.plz inform me.

109.Mudassir Hanif says:3/5

assalam-o-alaikum i am complete dae in metallurgy from pakistan steel and i am doing b.tech in mechanical from indus university

110.Muhammad Omer Subzwari says:3/5

Assalam O Alikum, Dear Sir, I am doning D.A.E in mechanical and i am in 2nd year.I need a internship in your pak suzuki.You may contect me my num is;

111.Omer Subzwari says:3/5

Assalam o alikum I am completing my d.a.e in mechanical and want to internship in pak Suzuki.If any vacancy come please contect. Thanks

112.Muhammad Dehlan Wajid says:3/5

Assalam o alikum I am doing D A E in mechanical and want to internship in pak Suzuki.If any vacancy come please contect. Thanks

113.Syed Wasif Haider says:3/5

Sir, Asalam o Alikum , I want to inform you that I m a student of mechanical engineering in Giki , and I want an internship in Pak Suzuki Motor this summer , I have a great interest in the field of automobile and I ensure you that I will be energetic in my whole duration of internship. I shall be very thankfull If you consider my application. Thankyou :)

114.Naif M.habib says:3/5

I state to say that sir i complete my d.a.e in auto and diesel so i want job in suzuki company thank you.

115.Shahab Hameed says:3/5

Assalam-o-alikum i am student of institute of YMCA polytechnic and heaving diploma of DAE (Auto & Diesel) in 2nd year. I am seeking an opportunity to your company in apprenticeship or intership. Thankyou plz reply.

116.Uzair Alam says:3/5

Aslam o likum.i am student D.A.E for machanical 2nd year.plz join appentership pak-suzuki.sir plz request accepted appentership.plz contact.E-mail addres

117.Saad says:3/5

Asslam-o-Alikum i m waiting i m doing D.A.E 3rd year mechanical from y.m.c.a I m searching for this company i m joining your company internship or apprenticeships i need this mechanical job contact me my Email addres and my no

118. M.atif Khan says:3/5

job

119.Faheemnoor says:3/5

i am a ,diploma associate engineering,in(auto&diesel) from st,patrick instiuite science&technology karachi. i am a traning in a your company in technition feild .

120.Bilal says:3/5

@22.Urooj: syeed bilal_shah daughter

121.Aligohar Sehro says:3/5

mehran car book 4 month our conten no

122.Muhammad Uzair says:3/5

ASSALAM-MU-ALIKUM im matric pass in b grade i need apprentice ship in your compony

123.Mohammad Sufyan says:4/5

hi salaam to pk Suzuki I am Mohammad Sufyan Ali and i want apprenticeship in your company plz give me a chance.

124.Sohail Aziz Ahmed says:5/5

ASSALAM O ALAIKUM I AM STUDENT OF B-TECH (ELECTRONICS) CONTINUE TO SEARCHING APPRENTICESHIP OR INTERNSHIP. IF YOUR COMPANY PROVIDE THE TRAINING PLZ CHANCE ME FOR TRAINING MY CONTACT NUMBER IS 0312- OR OTHER CONTACT 0300- AND MY EMAIL

125.M.azmeerkhan says:3/5

ASSLEM O ALAIKUM I AM STUDENT IN D,A.E 2 YEAR PLEASE INEED APPRENTICESHIP FOR YOUR COMPONY

126.Noman Khan says:1/5

i am noman khan enter

127.Shabber Ali says:5/5

I M A Student Of D.A.E Auto And Diesel Technology In Final year From St.Patrick' Technical School and i have also completed my Inter from PEF KIET College and now I M Looking For Apprenticeship or Internship Job. Kindly ACT MY APPLICATION THANKS.

128.Ali Raza says:3/5

Dearsir I'm student of govt collage of technologe machnical 2nd year please tell me training course how

129.Azmeerkhan says:3/5

Asslam-o-Alikum i m student OF D.A.E 2st year mechanical form Govr.Collage of Technology s.i.t.e Karachi I m searching for this company i m joinig your company internship or apprenticeships plz contact me my Email address i m waiting for your feedback thankx Asslam-o-Alikum please, my num.

131azmeer 129
130.Faraz Siddiqui says:1/5

3 years diploma in electronics 1st position 2010. b.tech in electronics waiting for result. cell: -

131.Azmeer says:3/5

@129.Azmeerkhan:

132.Shahab Hameed says:3/5

hi im student of d.a.e auto and diesel in final year i want a internship in your company for experience u have any vacancy contact me at this num im waiting for your responce thanxxxx

133.M.pervez Khan says:3/5

aoa,i am a qualiefied pharmacist ,i hav own business ,i m physicaly disable,i want to bye a car so how much wll b concession 4 me,as a disble person@plz gauid me,

134.M.sami says:3/5

pak suzuki m job dae secnd year student G.C.T plzz

135.Hafiz Bilal Ansari says:5/5

Assalam u Alaikum. My name is Bilal and I'm the student of D.A.E. MECHANICAL 3rd Year from Govt. Saifi College. I want to internship or apprenticeship in any mechanical related work in Pak Suzuki. I'm waiting for your feedback. Thanks

136.Ali Raza says:3/5

most respectable sir my name is ali raza.i am fresh mechanical diploma holder and get 76% in DAE Mechanical.Plz give me a chance

137.Muhammad Imran Bashir says:3/5

I m M.Imran Bashir,I have Done D.A.E(Mechanical Power with specialize Auto & Farm) in 2014 From G.C.T Sahiwal.I m join Pak Suzuki as a internship Please Give me a Chance.Thanks

138.Eric Sadiq says:3/5

I want assisstance in my engine fault to be resolved.... engine blows out engine oil not in regular basis but randomly after every 3 to 4 days....what should i do to get rid of this problem??? Car: Cultus model 2005. kindly help me to resolve this problem.what should i do to get rid of this problem

139.M Rehan says:3/5

My qualification is btech in mechanical nd D.A.E(Mechanical).I am searching internship or apprentecship for this company.please contact me in my Email Address and contact number.thank you

140.Fida Hussain says:3/5

dear sir i have done one year automobile course from Aman Tech from dec 2014 and now i join a job in ur company pls give me a auto technician job.

141.Shabeer Ahmed says:3/5

I am student of engineering university quest nawashah,i want to internship in pak suzuki motor company,so plz allow me for internship.thank you.

142.Imran Yousaf says:1/5

am putting ur attention to a serious matter which is giving bad name to Suzuki company.ur regional dealer over here in Islamabad (azeem Suzuki motors I 10/3)is not satisfying da customers.i had an accident and then I took my Suzuki swift car for da repair,inspire of 3 weeks they didnt even touch da car .they saying that da company wil send da parts from Karachi in a month and they we wil replace it. make a proper inquiry against it... DY 476 Suzuki swift

143.Zeeshan Rahim says:4/5

I am a student of B.tech .I passed D.A.E in electrical .i need a job so plz give me a little job plz

144.Muhammad Zeeshan says:3/5

I am a auto denter 15 16 years experience I am needed a job reply mohammadarsalan03 gmail.com

145.Hamza says:3/5

Hello Im Hamza Fayyaz Im study in 2nd year in bufferzone degree collage i need this job because Im needy person zz call me zzzz for Interview .

146.Mufeez says:3/5

I am diploma holder.please give me job in any department of your compony .I passed diploma from st patricks technical collage

147.Muhammad Ifrahim Kahn says:3/5

i am d a e mechnical and b.com and computer education count give mae a job

148.Faryal Zaffar says:4/5

I am a diploma holder and complete bi.com .i really need a job please give me a job..

149.Faryal Zaffar says:3/5

I am a diploma holder and b.com i need a job .please give me job

150.Shaista says:4/5

suzuki alto problem may change pls guide me.. must be reply pls.

151.Ghulam Mustafa says:3/5

Request for Internship IVQ (International Vocational Qualification) Certificate Course in Motor Vehicle System from AMANTECH, Karachi (City & Guilds, U.K) in 2015. Diploma of Associate Engineer (D.A.E) from SBTE, Karachi 2 Year course: Machinist from TTB, Karachi

152.Fahad Ansari says:3/5

Am final year student of BEE i want to get apprenticship

153.M.ali Mehmood says:4/5

Martic scince job pak suzuki plz contact

154.M.ali Mehmood says:4/5

Martic scince job pak suzuki plz contact

155.Hussain Karim says:4/5

my name is hussain karim i complete D,A,E in snt partick,s in Automobile 3 years i want internship in yours company...Thanks

156.Muhammad Haseeb Aslam says:5/5

Apply for Apprenticeship.

157.Muhammad Basit says:3/5

@64.Mohsin Khan: I am diploma holder.please give me job in any department of your compony .I passed diploma from coverment technical collage (GCT)

158.Muhammad Ovais Rafi says:3/5

I resppect fully, I beg to.say that I am a Designer in Auto Cad and Proe and operators in athers machine then depending on work place. and I am a faro operator and software in Power Inspect operator. then your relable for a company to call me. and my working test in others (Jigs). Thanks 0347-

159.Muhammad Rafiq says:4/5

I have done DAE in Mechanical.Now I want to apprentice ship with your company.so give me a Chance.

160.Hamid Ali says:4/5

@77.Mahreen Asrar: HI THIS JOB VERY BAD NO REPLY AND NO MSG

161.Syed Rubas says:3/5

I am student in D.A.E 2nd year in st.patricks technical institute and interested in apprenticeship in your company.so give me a chance

162.Muhammad Zubair Khan says:3/5

I have done fsc from cadet college razmak and i m graduate of NEDUET in marine engineering. I have one year industrial training experience from Pakistan national shipping corporation.I wish to do relevant job in such a brilliant company like suzuki which will help me to learn more by working hard.

163.Muhammad Qadeer Uddin says:3/5

I am diploma holder in RACT from Pakistan Steel mill.

164.Ghulam Maaf Ali says:3/5

im a student of D.A.E 2nd year Machenical . I want to do intership in Suzuki company . Thanks.

165.Muhammad Talha says:3/5

I am a fresh electronic diploma holdar.i want a job in suzuki company.

166Umair khan Umair khan 165
166.Umair Khan says:4/5

@165.Muhammad Talha: Umair khan

167.Umair Khan says:4/5

Frontie colony no 2 site town karachi Umair khan

168.Muhammad Shafiq says:3/5

I have need a job. I am a diploma holder in auto and diesel from ctti Islamabad. And i am working in Toyota frontier motor peshawer as a technician

Pages 12
© Paktive.com. Privacy Policy